Stanley No. 4-1/2 & 4-1/2 C Smoothing Planes
Stanley No. 4-1/2 Smoothing Plane (Type 10) (4)
- Features(1): 4-1/2C has corrugated bottom
- Manufactured(1) 1869 to 1984
- Patents(1)::
- Leonard Bailey's 8/31/1858 (lever cap)
- Leonard Bailey's 8/6/1867 (cutter adjustment)
- Leonard Bailey's 12/24/1867 (thin cutter & cap iron)
- Josef Nicht's 2/8/1876 (lateral)
- Justus A.Traut's 10/21/1884 (improved lateral)
- Justus A.Traut's 7/24/1888 (disc pivot lateral)
- Edmund A. Schade's 9/3/1895 (fine frog adjustment)
- Henry Richard's 3/25/1902 (improved frog)
- Alix W. Stanley's 8/19/1902 (frog receivers)
- Edmund A. Schade's 4/19/1910 (improved frog adjustment)
- Earl V. Higbee's 7/18/1933 (lever cap)
.jpg)
1870 Catalog Image of Bailey Smoothing Plane Showing Beaded Low Front Knob (2)
Dimensions(1): 9 inches longCutter(1): 2 inches wideConstruction(1): cast iron, rosewood handle and knobFinsh(1): JapannedUser Info(1): General purpose bench plane. Just one inch longer and with 1 3/8-inch wider cutter; this plane is considerable heavier than the No. 4, making it one of the best smoothing planes for surface lumber. its weight reduces chatter and helps the plane set close to the wood, providing a very smooth surface. It requires more strength to use but quickly does the job of finishing large surfaces. Relatively easy to obtain and it favored by many cabinet shops The 4-1/2C is preferred by many for working on resinous woods. The corrugated provides less friction, making the plane glide easier.
.jpg)
1888 Catalog Image of Bailey Smoothing Plane Showing Lateral Adjustment (2)
Average Price(1): $25 to $75Type 4: $50 to $125 (1874 to 1884)Type 3: $300 to $600 (1872 to 1873)Type 2: $150 to $300 (1869 to 1872)Type 1: $250 to $550 (1867 to 1869)Note:
.jpg)
1923 Catalog Image of Bailey Smoothing Plane Showing High Front Knob(3)
Sources:
1. Walter, John . "Antique & Collectable Stanley Tools, Guide to Identity and Value", 2nd Edition, 19962. The Stanley Catalog Collection, 1855 to 1898, The Astragal Press, Mendham, New Jersey3. Smith, Roger K., Reprint of Stanley Catalog No 120 orginally issued in 1923, "Carpenters' and Mechanics Tools", The Stanley Rule and & Level Plant, The Stanley Works, New Britain, Conn., U.S.A.4. Stanley No. 4-1/2 Smoothing Plane, Type 10, Tool Collection of Gordon Muster. Purchased on Ebay for $20 (I was the only bidder) from seller who had described it only as a very rusted No. 4 with broken handle (the 1/2 was covered by dirt). Handle was broken in three pieces but I could tell from the screw in the bottom of the handle that it was a 4-1/2 instead. As purchased was heavily rusted and some pitting on sides. Removed little amount of japanning left (20%) and gave it a bath in the electrolysis tank. Bottom then lapped flat, rejapanned and blade replaced with a new Hock Blade. Not orginal japanning but great user plane for an exceptional price.
1. Walter, John . "Antique & Collectable Stanley Tools, Guide to Identity and Value", 2nd Edition, 19962. The Stanley Catalog Collection, 1855 to 1898, The Astragal Press, Mendham, New Jersey3. Smith, Roger K., Reprint of Stanley Catalog No 120 orginally issued in 1923, "Carpenters' and Mechanics Tools", The Stanley Rule and & Level Plant, The Stanley Works, New Britain, Conn., U.S.A.4. Stanley No. 4-1/2 Smoothing Plane, Type 10, Tool Collection of Gordon Muster. Purchased on Ebay for $20 (I was the only bidder) from seller who had described it only as a very rusted No. 4 with broken handle (the 1/2 was covered by dirt). Handle was broken in three pieces but I could tell from the screw in the bottom of the handle that it was a 4-1/2 instead. As purchased was heavily rusted and some pitting on sides. Removed little amount of japanning left (20%) and gave it a bath in the electrolysis tank. Bottom then lapped flat, rejapanned and blade replaced with a new Hock Blade. Not orginal japanning but great user plane for an exceptional price.