Stanley No. 92 Cabinet Makers Rabbet
Stanley #92 Cabinet makers Plane (later type made in England) (5)
1909 Catalog Image of Stanley No 93 Cabinet Makers Rabbet Plane(2)
Disc on Nose Piece with Later Notched Trademark(6)
Stanley No 92 Blade Trademark for Later English Type
Features(1): Adjustable ThroatManufactured(1): 1902 to 1969Patents(1): Traut's 3/13/1900 (endwise screw cutter adjustment)Dimensions(1): 5-1/2 inches longCutter(1): 1 inch wideConstruction(1): Cast IronFinish(1): Nickel platedUser Info(1): An extremely accurate adjustable throat rabbet plane used by cabinetmakers for fine, close tolerance work either vertically or on its right or left side. The top front portion of the plane can be moved back and forth to control thickness of the shaving. Another standard tool in a fine workshop.
Average Price(1): $75 to $150Type 1(1): $100 to $200Current English Production Prices:Garret-Wade(8) : $77.70 (Blade $11.50)Woodcraft(9): $79.99 (Blade $11.00)Note(1): A steel disc was inserted onto the front of the plane. This disc covers the hole for the sand core that made the front portion of the plane hollow. On most types, the trademark will be stamped on this disc which can be used to determine vintage. Type 1 does not have the disc. The bottom of the plane is a separate piece pinned to the sides which allowed casting the front portion of the plane with a hollow cavity to reduce weight. Always check the cutter on the later types to avoid buying an English model. English models made after 1980 are not hollow and do not have the disc.Tuning7: Garret Hack notes that "The key to tuning any rabbet plane is aligning the iron both with the sole and with the side (or sides) of the plane. The object is to have the cutting edge parallel with the sole and parallel with, and just barely peeking out, on the side.This is one of those things that is easier said than done, and will take some experimenting. Once the iron is aligned with the side, check that it's parallel with the sole. The only way to remedy any large misalignment is by grinding and rehoning the edge. With the iron properly ground and honed, careful honing in the future should keep everything in alignment"
Sources:
1. Walter, John . "Antique & Collectable Stanley Tools, Guide to Identity and Value", 2nd Edition, 19962. Wood, Jack P. "Early 20th Century Stanley Tools, Price Guide". Contains reprints of the 1909 and 1926 Stanley Works Tool Catalogs.3. Smith, Roger K., Reprint of Stanley Catalog No 120 orginally issued in 1923, "Carpenters' and Mechanics Tools", The Stanley Rule and & Level Plant, The Stanley Works, New Britain, Conn., U.S.A.4. Lee, Leonard, "The Complete Guide to Sharpening",Taunton Press, Inc.,19955. Stanley No 92, Later Type made in England, Tool Collection of Gordon Muster . New Condition. Nickel is 100%. Purchased December 1998 at Woodcraft for about $756. Example found on Ebay7. Hack, Garret, "Rabbet Planes Are Real Shop Workhorses", Fine Woodworking, Jan/Feb 1998.8. The Garret-Wade Tool Catalog, Number 7, Volume #26, November 19999. Woodcraft Catalog, September 2000 Catalog
Sources:
1. Walter, John . "Antique & Collectable Stanley Tools, Guide to Identity and Value", 2nd Edition, 19962. Wood, Jack P. "Early 20th Century Stanley Tools, Price Guide". Contains reprints of the 1909 and 1926 Stanley Works Tool Catalogs.3. Smith, Roger K., Reprint of Stanley Catalog No 120 orginally issued in 1923, "Carpenters' and Mechanics Tools", The Stanley Rule and & Level Plant, The Stanley Works, New Britain, Conn., U.S.A.4. Lee, Leonard, "The Complete Guide to Sharpening",Taunton Press, Inc.,19955. Stanley No 92, Later Type made in England, Tool Collection of Gordon Muster . New Condition. Nickel is 100%. Purchased December 1998 at Woodcraft for about $756. Example found on Ebay7. Hack, Garret, "Rabbet Planes Are Real Shop Workhorses", Fine Woodworking, Jan/Feb 1998.8. The Garret-Wade Tool Catalog, Number 7, Volume #26, November 19999. Woodcraft Catalog, September 2000 Catalog