Stanley No 96 Carpenters Plumb and Level
Stanley 96 Carpenters Plumb and Level Type 1 (5)
Top Plate with Early Trademark and Traut's 6/2/1891, 2/4/1896, and 6/23/1896 Patent Dates (5)
1897 Catalog Image of Stanley 95 Carpenters Plumb and Level (Seperate Image of No. 96 not in Catalog) (2)
1909 Catalog Image of Stanley 95 Carpenters Plumb and Level (Seperate Image of No. 96 not in Catalog) (3)
1923 Catalog Image of Adjustable Level Frame (4)
1923 Catalog Image Showing Plumb Glass Mounting Details for Adjustable Levels (4)
1926 Catalog Image of Section Detail H Showing 3 Piece Dovetailed Construction (3)
Manufactured(1): 1897 to 1935Patents(1): Justus Traut's 7/17/1894 (simplified vial carrier) - Trauts's 2/19/1895 (adjustable bed and tensioning) - Traut's 2/4/1896 (Design patent for level frame)Sizes(1): 24 to 30 inches longConstruction(1): lacquered rosewood, brass boundAverage Price(1): $100 to $250Notes(1): Made with a triple stock and extra brass corner tips from 1897 to 1911. Made with a five-piece stock from 1911 to 1935.Details(4): Adjustable Levels have the level glass set in plaster in a metal case. This case is fastened to a steel base on one end by a screw and bushing and on the other (adjusting end) by a special spring and adjusting screw. The case complete is fastened securely in the level by two wood screws. The top plate is independent of the level case thus permitting the level to be easily adjusted. The Plumb Glass in adjustable levels are set in a case flanged at one end, and is secured to a specially formed cap so made that there is leeway for rotating the flanged case for the proper alignment. Cut C. Three Ply levels have a novel method of securely holding the sections of the level in place by a series of tongues and grooves running the entire length of the level.Cut H
Sources:1. Walter, John . "Antique & Collectable Stanley Tools, Guide to Identity and Value", 2nd Edition, 19962. The Stanley Catalog Collection, 1855 to 1898, The Astragal Press, Mendham, New Jersey3. Wood, Jack P. "Early 20th Century Stanley Tools, Price Guide". Contains reprints of the 1909 and 1926 Stanley Works Tool Catalogs.4. Smith, Roger K., Reprint of Stanley Catalog No 120 orginally issued in 1923, "Carpenters' and Mechanics Tools", The Stanley Rule and & Level Plant, The Stanley Works, New Britain, Conn., U.S.A.5. Stanley No 96 Type 1, Tool Collection of Gordon Muster . Very Fine Condition except missing one screw on top center faceplate and one screw on one end tip. Brass has only typical dings and scratchs from use with only one small dent and a nice unpolished patina . Rosewood has only usual dings from use.Purchased March 2001 on Ebay for $77.